How to Make DIY Studded Fat Bike Tires: 7 Easy Steps

Studded tires are a DIY project that can be done in just a few hours for less than $50, but the benefits of this DIY project go way beyond money. Studded fat bike tires give you more traction on ice and snow so you stay safer while riding your bike. If you would like to learn how to make studded fat bike tires step by step, then keep reading! 7 Steps DIY Studded Fat bike Tires: 

DIY Studded Fat Bike Tires

Tools and Parts for DIY Studded Fat Bike Tires

Image PRODUCTS
Mongoose Fat Tire Bike Tire

Tires &Tubes

Screw in Tire Stud

Studs For Fat Bike

DEWALT 20V Max Cordless Drill / Driver Kit, Compact, 1/2-Inch

Screwdriver or drill

Park Tool 2 Carded Tire Lever Set

Screwdriver or drill

Franklin Sports High Pressure Foot Pedal Air Pump for Balls, Bikes, Inflatables and More

Tire pump

AmazonCommercial 13G Nylon & Nitrile Gloves (Grey/Black), Size XL, 12 pairs

Gloves

Orange Seal - Endurance Formula Tubeless Bike Tire Sealant

Tire Sealant

  1. Tires &Tubes
  2. Studs
  3. Screwdriver
  4. Drill & Drill bit 
  5. Tire levers
  6. Tire pump & Tire gauge
  7. Soap and Water
  8. Gloves
  9. Silicone or contact cement

Get all the tools needed for the job like scissors, pliers, screwdriver, or wrench

7 Steps DIY Studded Fat bike Tires

  1. Select Your Tire Grab a slightly worn tyre 
  2. Use cutters to trim down the knobs for better stud exposure 
  3. Use 2mm drill bit to drill a hole in every knob 
  4. Add One Drop of Hand Sanitizer to Each Pocket
  5. Turn the tire inside out and put screws into every drilled hole 
  6. Use 360 mounting screws with mounting head 
  7. Mount the tire in your rim and pour in some sealant 
  8. Pump it and you are done

Step 1: Select Your Tire Grab a slightly worn tyre

Select Your Tire Grab a slightly worn tyre

Remove the valve stem core using a screwdriver or drill. This will allow you to inflate and deflate rubber easily without taking off the tire.

Step 2: Use cutters to trim down the knobs for better stud exposure

Use cutters to trim down the knobs for better stud exposure

For better Stud grip, you may need to cut the knobs of your tire using a scissor. Step is not done yet!  You need to clean the tire first with soap and water to remove dirt.

Step 3: Use 2mm drill bit to drill a hole in every knob 

Use 2mm drill bit to drill a hole in every knob 

Now that your tire is cleaned, it’s time to drill holes. Make sure you use the right size of drill bit for better Stud grip.

Step 4: Add One Drop of Hand Sanitizer to Each Pocket

Add One Drop of Hand Sanitizer to Each Pocket

After drilling one hole, you need to add just a drop of hand sanitizer on the exposed rubber. This will help set Studs into the tire.

Step 5: Turn the tire inside out and put screws into every drilled hole 

Turn the tire inside out and put screws into every drilled hole 

Turn the tire inside out and put screws into every drilled hole. Make sure you screw Studs all around without leaving any knob exposed.

Step 6: Use 360 mounting screws with mounting head  for better Stud grip

Use 360 mounting screws with mounting head  for better Stud grip

If your screws don’t have a mounting head, you need to use extra washers for a tighter grip. Then tighten them using a screwdriver or wrench.

Step 7: Mount the tire in your rim and pour in some sealant 

Mount the tire in your rim and pour in some sealant 
Mount the tire in your rim and pour in some sealant 

Mount the tire in your rim and pour in some sealant. Add air then check for leaks using soap water. Don’t forget to add air and wipe off the excess sealant.

Pump it and you are done !

Your Studded fat bike tires are ready to go! Note that you should not ride on ice or snow with your new Studded Fat Bike Tires.

Making studded tires at home is a cheap and easy way to customize them. The Best Way To Make Your Own Studded Tires is with an aftermarket stud kit. Many of the options on our list include these kits so you can get more grip than ever before!

Another option for creating your own set of studs is to drill holes in some old tires and sticking them onto your new ones. This method takes a lot of time, but it may be worth it depending on how much traction you need out there on the trails or roads!

Best Studs for Fat Bike Tires

Image PRODUCTS FEATURES Check Price
Marrkey 12mm Carbide Screw Tire Studs Snow Spikes Anti-Slip/Anti-ice

Marrkey 9mm-25mm Carbide Screw Tire Studs

  • Size: 4x9mm, 4x12mm, 6x15mm, 6x18mm, 6x20mm, 6x25mm
Marrkey Tires Studs/Screw Snow Carbide Spikes/Wheel Tyres Studs for Racing car,Bicycle,Bike,Fat Bikes, Scooters Tires,Running Shoes Boots in Winter 79.9mm

Marrkey Tires Studs /Screw Snow Carbide Spikes

  • Size: 7mm(W) X9.9mm (L)
Screw in Tire Stud,Marrkey Steel Body Carbide Tips [Security Anti-Skid] Spikes Tire/Tyre for Bicycle/Shoes/Boots with Installation Key - Pack of 100

Screw in Tire Stud,Marrkey Steel Body Carbide

  • Size: 8.5mmx6mm
Qiilu 100pcs Snow Tire Studs, 9.8mm Wheel Tyre Screws Winter Snow Tire Spikes for Car ATV Motorcycle Bike Shoes

Qiilu 100pcs Snow Tire Studs

  • Size: 9.8mmx7mm
100pcs 9mm/0.35" Tire Stud Screw, Keenso Anti-Slip Snow Tire Studs Wheel Tyre Tire

Keenso Anti-Slip Snow Tire Studs

  • Size: 9mm/0.35″
AXIS Tire Studs for Fat Bike,Studs for Tires,Steel Body with Carbide Tips,300pcs/lot

AXIS Tire Studs for Fat Bike

  • Size: 6.5mmx5.7mm

How many studs should a fat bike tire have?

How many studs should a fat bike tire have
How many studs should a fat bike tire have

The number of studs your fat bike tire should have depends on the type of riding you will be doing. For snow and ice, go with a larger number ( 120-300 )of studs per tire. For riding on normal roads, around 60-80 studs per tire is sufficient.

What Are the Benefits of Studded Fat Bike Tires?

How many studs should a fat bike tire have
How many studs should a fat bike tire have

Studs are mainly used for winter fat bikes. This is to provide as much traction as possible on different types of terrain such as ice and snow where non studded tires would slip out from under the rider.

The benefit  of using studded fat bike tires:

  1. For safety reasons when encountering extreme conditions.
  2. Provide great traction in winter weather.
  3. Improves traction and grip.
  4. Are great for those who need their fat bike to perform well in winter conditions.
  5. Studded tires will keep you safe while cycling on the trail when there is snow present.
  6. Studded tires can help with surfaces such as sand and mud, but they are not always necessary.
  7. Riders will have confidence to enjoy a ride.
  8. Studded tires reduce the risk of injury significantly.

So,  if you’re out in the snow and ice a lot, studded fat bike tires are going to be your best option.

Check out this blog about 6 Best Fat Bike Frames

What are the disadvantages of studded fat bike tires?

What are the disadvantages of studded fat bike tires
What are the disadvantages of studded fat bike tires

Studded tires can be expensive and the work involved in installing hundreds of metal studs is not something that everyone will want to do themselves.

The disadvantages of using studded fat bike tires:

  1. Can be expensive and the work involved in installing hundreds of metal studs is not something that everyone will want to do themselves.
  2. It does take a lot of time, money, and effort for riders who don’t have access to an installer or purchase pre-studded tires for their bike.
  3. It can be difficult to find heavy duty studded fat bike tires if you live in a place that doesn’t receive snow or ice very often.
  4. Some individuals are unaware of fat bikes with studs because they don’t ride much in areas where there’s little to no snow, which is not the best place to use studded tires.
  5. It can be difficult to find heavy duty studded fat bike tires if you live in a place that doesn’t receive snow or ice very often.

studded fat bike tires both have their benefits and disadvantages. Some people don’t like the sound of studded tires on certain surfaces, so they can switch out to regular tires for summer and winter.

Studded Tire Maintenance:

Studded Tire Maintenance
Studded Tire Maintenance

Taking care of your Best studded fat tire will increase its lifespan and make sure that it performs to the highest possible standards!

  • For mud, you need a soft brush to get rid of any dirt.
  • For cleaning, cold water is best because it prevents oxidation. You can also use soap or mild detergents to ensure that your Best studded fat tire stays clean and performs at its very best!
  • Any dry dirt should always be removed with a hard brush before it becomes embedded.
  • After each ride, Best studded tire should be checked and tightened as required to prevent any problems during future rides.
  • You can apply a thin layer of silicone or other water repellent sealant if you desire additional protection against the elements!

Why Do It Yourself Studded Bike Tires?

Why Do It Yourself Studded Bike Tires
Why Do It Yourself Studded Bike Tires

The first reason is cost. A set of new studded tires can be as cheap as $40, where as a pair of quality non-studded tires will set you back closer to $100. That’s not even taking into account that your studded tires will only last through one winter whereas the other ones may very well last 5 or more.

The second reason Studded tires are only useful in snow and/or mud, so if you have a set of studded tires they may be unusable for the other situations. By doing it yourself you can easily mod your tires for any condition.

The third reason is versatility. Snow and ice are the best times to use studded tires, but non-studded winter tires are more versatile. If you know how to swap tires on your bike you can quickly and cheaply modify your setup for whatever conditions that may arise.

The last reason is just pure pleasure, by wrenching on your own bike even if it’s only a simple tire swap you get to experience the satisfaction of knowing that for one winter at least, you won’t be left stranded. That feeling of knowing that you can handle it is a whole lot better than just hoping an “experienced winter rider” will come by and help you out of the jam.

Studdable Fat Bike Tires are an option especially for those who want to be in complete control of their own set up with the possibility of stud installation at any time by anyone that knows how to do it properly. Studs can be installed at any time by anyone who knows how to do it properly.

Is There any other way besides DIY ?

Pre-Studded Fat Bike Tires

Pre-Studded Fat Bike Tires
Pre-Studded Fat Bike Tires

Pre-studded tires are a great way to get out on the snow for very little money. Many retailers offer studded tires ranging from about $70 -$100. The installation procedure is pretty simple and can be done in minutes with common hand tools. Read our Top 3 best Pre-Studded Tires for Fat Bikes Review here.

Read Best Studded Fat Bike Tires with detail guide and resources!

The benefits All Pre-Studded Fat Bike Tires come with Pre-Installed Studs!

1) You don’t have to do any work.

2) Most retail studded fat bike tires come with studs that are more aggressive and longer than aftermarket studs.

3) You don’t have to worry about your studs falling out.

The downsides of Pre-Studded Tires

1) These tires are mass produced and stud placement is not always uniform on the tire. This means that some tires may be better than others depending on manufacturer.

2) If you ride on overly smooth, hard-packed trails the studs will be deformed and misshapen after riding.

3) The studs are inclined to pop out on super hard-packed trails if they are not embedded enough.

This is pretty much the most common problem with pre-studded tires. Although it only takes one time for them all to pop out, so you might as well learn how to do it yourself.

Studdable Fat Bike Tires

Studdable Fat Bike Tires
Studdable Fat Bike Tires

The final option for a person looking to upgrade their current tires is going with studdable fat bike tires. Studding them yourself can be done at any time by anyone who has the right tools and knows how to do it beforehand!

Also Read Best Fat Bike Tires Reviews

It is not as easy as pre-studded tires, but it will provide you with more studs at a cheaper price. A set of studs from a popular manufacturer cost about $40 and will do 4 tires. You can use your existing tires or pick up a pair of new one’s for the process.

Why Do Studs Continue to be so Popular?

Why Do Studs Continue to be so Popular
Why Do Studs Continue to be so Popular

experience and don’t mind putting the studs in yourself.

It’s difficult to explain things to others. Some individuals are unaware of fat bikes with studs. This may be the case if they are riding in places without much snow. If there isn’t much snow, a bike with studs on the tires may be preferable because they will also function well.

It’s always a smart idea to seek assistance from individuals who might be more informed about the subject than you are. If you’re looking for tires for your bike and don’t know which ones to choose, consult someone who knows. Make it easy on yourself. If the snow is deep and there’s a risk of an accident or slipping, get studded tires! Studded tires will keep you safe while cycling on the trail when there is snow present.

Conclusion:

If you are looking for an easy way to convert your fat bike tires into studded ones, this article will help. The steps outlined here should provide a good starting point no matter what the condition of your tire treads.

We hope that these instructions have been helpful and we also want to invite you to share any other tips or tricks with us in the comments section below! Have fun creating DIY studded fat bike tires at home today-and happy riding!

FAQ’s

Can I stud my own fat bike tires?

Yes, you can. Follow our 7 step guide on how to make Studded Fat Bike Tire!

How do you put studs in a fat bike tire?

You can use a sharpened screw or bolt to put studs in your tire. You can also use a power or pneumatic drill for this.

How long does it take to stud a fat bike tire?

The time it takes to stud a fat bike tire depends on the number of tires you are doing and whether or not you have a drill. If you have a drill, it will take around 30-40 minutes per tire.

Can you stud any bike tire?

Yes, you can. Most bike tires will be compatible with studded tire systems except for road and BMX racing bikes.

Do you need studs on a fat bike?

No, you do not need studs on a fat bike. There are many reasons why people opt to put different types of tires on their fat bikes. You can also ride studless tires on snow and ice without any trouble.

How long do studs on tires last?

If you are using a good quality screw or bolt, studs will last for years without requiring replacement.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *