How To Put Training Wheels On A Bike? [13 Steps]
Getting started without a pair of training wheels can be dangerous for your kids. It’s always wise to start with training wheels if your kid has just started learning to ride a bike. However, if you want to attach it with the bike, you have to learn the proper technique to do so. In this article, I will guide you about how to put training wheels on a bike so that you can easily do it yourself.
- Step 1- Remove the nuts-bolts
- Step 2- Insert bolt through the wheel
- Step 3- Install the bolt
- Step 4- Insert nylon locking nut
- Step 5- Place the wrenches in the wheel
- Step 6- Turn the nuts until they are tightened
- Step 7- Take the bike
- Step 8- Remove the cone nut
- Step 9- Remove the axial nut and washer
- Step 10- Insert the notch washer
- Step 11- Insert training wheel in the bike
- Step 12- Input the washer and axle nut
- Step 13- Install cone nut
Step 1- Remove the nuts-bolts:

Open up the bolt package that comes with the training wheels package and remove two bolts and two nuts.
Step 2- Insert bolt through the wheel:

Take one wheel and a bolt and insert it straight through the wheel.
Step 3- Install the bolt:

Once the bolt is through the wheel, take one of the arms and install the bolt straight through the arm so that the bolt goes through the wheel first then through the bracket arm.
Step 4- Insert nylon locking nut:

Take a nylon locking nut and loosely fit it on to the ball until it gets off tight.
Repeat with the other one: Do the exact same for the second wheel.
Step 5- Place the wrenches in the wheel:

Once the nut is on the bolt, grab your 13 mm open ended wrench and your 17 mm open ended wrench and insert them both on the wheel themselves.
Step 6- Turn the nuts until they are tightened:

While holding the 17 millimeter wrench in place, use your 13 millimeter wrench to turn the nut outside of the wheel.
Repeat with the other one: Once the bolt is well inside, grab your second wheel and do the exact same.
Step 7- Take the bike:

Once both of the wheels are ready, get the bike to start installing.
Step 8- Remove the cone nut:

Grab the 15 millimeter wrench and remove the cone nut on the rear axle.
Step 9- Remove the axial nut and washer:

Take the 17 millimeter wrench and completely undo the 17 millimeter EQ axial nut. Then remove the washer.
Step 10- Insert the notch washer:

Now insert the notch washers that comes with the training wheels package
Step 11- Insert training wheel in the bike:

Grab one of the training wheels and put it onto the axle in the top slot.
Step 12- Input the washer and axle nut:

Install the existing washer that you took out earlier along with the axle nut and tighten with the 17 mm wrench.
Step 13- Install cone nut:

Insert the 15 mm cone nut and place that right back on the axle and tight as much as you can with the 15 millimeter wrench.
Repeat the action with the other one: Once you’re done with one side, do the exact same for the other training wheel.
Bicycle training wheels for adults
You probably don’t know training wheels can also be used in an adult’s bike! Sounds amazing, right? No wonder some adults are deprived of biking in their childhood. They can still get to start to learn biking. And luckily, they can install training wheels on their bikes so that they will get more confidence.
How big is a 26 inch bike?Click here to know more about 26 inch bike
Bicycle training wheels are a great way to learn how to ride a bike without risking any injury. Adult training wheels come in a variety of designs and sizes and are adjustable to fit most bikes.
Once you have them fitted, you can start practicing by riding your bike manually with the training wheels on. Once you have mastered this, you can switch over to using the training wheels with the assistance of a pedal bike trainer.
Bicycle training wheels For Kids
Bicycle training wheels are an invaluable tool for children who are learning to ride a bike. They help to make the process of getting on and off the bike much easier, and can also help to prevent accidents. When fitted properly, bicycle training wheels will also improve the child’s balance and coordination. Once your child is ready to ride without training wheels, they can install them on their own bike.
FAQ
Are training wheels supposed to touch the ground?
No, training wheels shouldn’t touch the ground completely. It should be a little bit above from the ground. Once your kid gets some practice, you should make it a little higher, that way they will achieve a faster grasp of biking.
Can you attach training wheels to any bike?
It is possible to mount a pair of training wheels with almost every bike. However, there are few bikes that don’t support training wheels.
At what age do you take training wheels off?
There is no definite time frame that could say the exact age to take off the training wheels. However, if your kid gets enough experience and expertise, you can take off the training wheels at the age between 6-10.
How do you transition from training wheels?
Transition from training wheels will vary depending on the kid’s individual abilities. However, you can gradually remove support by highering the wheels or removing them completely for short periods of time. Make sure they’re practicing in an open area, and always encourage the kid to keep trying even if they fall.
Is it easy to put training wheels on a bike?
Yes, it is easy to put on the training wheels on a bike if you follow the instructions carefully.
Can I put training wheels on my new carbon road bike?
Yes, you can install training wheels on a carbon road bike. However, be sure to measure your wheel size so that the training wheels will fit properly.
Is it weird to use training wheels as an adult?

No, it is not weird to use training wheels as an adult. In fact, they can be a very helpful way to learn how to ride a bike safely and correctly. When you are just starting out, it is important to use training wheels to ensure that you don’t fall and get injured.
Once you have mastered the basics, you can remove them, but make sure to ride safely without them first.
Is it ok for me to put training wheels on my bike?
Yes, it is perfectly safe for you to put training wheels on your bike. Bicycle training wheels are adjustable, so they will fit most bikes.
They also come with a wheel guard, which helps to protect your bike from scratches. When you are ready to ride without them, just remove the training wheels and pedal using your feet .
Training wheels or no training wheels?

There is no right or wrong answer when it comes to training wheels. It all depends on the child, their skills, and the bike they are using. If you are just starting out and haven’t mastered riding without training wheels yet, you should definitely use them.
However, as your skills progress and you become more confident on your bike, you can eventually remove them.
Also Read: How Are Kids Bikes Measured?
What are the benefits of putting training wheels on a bike?

There are a number of benefits to using bicycle training wheels. They can help the child learn how to balance and ride correctly, which is important for safety. Additionally, training wheels can improve the child’s coordination and balance. Once your child is ready to ride without them, they can install them on their own bike.
10 Benefits of putting training wheels on a bike
- Helps the child learn how to balance and ride correctly
- Gives the child coordination and balance skills
- Can improve bike riding skills for children who are ready to remove them
- Installable on their own bike
- Beneficial for the development of fine motor skills
- Helps children develop dexterity and coordination
- Helps improve balance and posture
- Helps develop strong balance skills
- Helps children learn patience and perseverance
- Helps children develop independence & increase confidence levels
Conclusions
If you know how to put training wheels on a bike then you could save extra money that would have been charged to you by an expert mechanic. With the method above, you can easily install training wheels on your own! Get the wheels on and boost your kid’s confidence right away!