How To Remove a Bike Chain Without a Master Link In: 3 Steps

• Step 1: Clean and prepare your bike and bike chain
• Step 2: Release brakes and derailleur gear
• Step 3: Using a chain tool/ Chain breaker/ Rivet puller.

Have trouble removing your bike’s chain without a master link? Don’t worry, we’ve got you covered! In this guide, we’ll teach you how to remove a bike chain without a master link and tell you how to do it. Knowing these simple steps of removing a bike chain without a master link is key to getting the job done successfully and you’ll be able to remove your bike chain without any hassle.

Step 1: Clean and Prepare Your Bike and Bike Chain

It is important to clean and prepare your bike chain before attempting to remove it. This will help prevent any damage from occurring during the removal process. To clean the bike chain first remove any dirt or debris located on the surface of the chain. Next, use a degreaser to loosen and remove stuck-on grease and oil.

Step 2: Release Brakes and Derailleur Gear:

Before removing the chain from the bike, it is important to release the brakes and derailleur gear. This will ensure that the bike doesn’t derail while the chain is being removed.

Step 3: Using A Chain Tool/ Chain Breaker/ Rivet Puller:

• First, select where you want to break the chain.
• Unscrew the punch clear of the slots and put the link you wish to open in the further slot.
• Screw in the punch until it touches the head of the rivet
• Ensure the punch rests in the center of the rivet head and that the other end of the rivet is not trapped by the body of the tool.
• To drive the rivet out of the front plate and through the rear plate, screw the punch into the tool. 
• Pull back the punch and break the chain by flexing the link with your thumbs on the flat side when the rivet is almost through the rear plate.

Check The Chain Tool:

---

How to remove a bike chain without a master link Without Any special Tool

Here are some basic tools you’ll need.

• A Hammer
• A Nail punches
• Something with a hole to push out the pin

First, you need to prepare your bike and bike chain and be sure you can hammer the chain.

Next, put the nail punch on the center of the rivet. If you don’t have a nail punch, use a narrow screwdriver instead. Now, repeatedly strike the rivet with the hammer until it fully pops out of the chain link. The link in the chain will be removed as a result of this step.

Putting the Chain Back

If you want to reconnect the chain again you need to put the rivet back by hammering it again.

Pro Tips: Master Links: Get a new one because it’s cheaper and will help with future maintenance.

How do I know if my chain has Master Link or missing it?

A bike chain master link is a specialized type of chain that is used on bicycles. It is a smaller and lighter chain than regular bicycle chains, and it is designed to be easier to operate. You can tell if your chain has a master link by carefully inspecting it. In comparison to the rest of the chains, it’s usually shinier.

If your chain has a master link that consists of 4 parts. You need to know these parts

• Rivet or Pin
• Inner Plate
• Outer Plate
• Roller

What is a Master Link in a chain?

A master link is the most significant link in a chain. It connects the two ends of the chain and maintains all links. If one of the links in the chain is damaged, the master link can be used to reconnect the chain.

How to find a Master Link in a chain?

This link will be either a metal link or a plastic link. If it is a metal link, it will be silver in color and have an engraving of a chain link on it. If it is a plastic link, it will be green in color and have the word “master” written on it.

Understanding a Bike Chain Master Link

A Bike Chain Master Link is a type of link that is used to connect the chain of a bike to the sprockets. It is important to use a Bike Chain Master Link when bike-riding because it ensures that the chain does not come off the sprockets and that the bike can be ridden smoothly.

There are two types of Bike Chain Master Links – direct and indirect. Direct Bike Chain Master Links connect the chain directly to the sprockets, while indirect Bike Chain Master Links connect the chain via a link pin. The link pin is a small, round piece of metal that is inserted into the chain link. It has an inner plate and outer plate, which are attached by rivets or pins.

The link pin roller sits on top of the inner and outer plates and helps to ensure that the chain-link moves smoothly and without friction. You can tell if your chain has a direct or indirect Bike Chain Master Link by looking at the rivet or pin that connects the link pin to the chain link. If the rivet or pin is a rivet, it is a direct bike chain master link. If the chain-link has a master link without a rivet or pin and with the roller pressing on the inner plate, it is an indirect bike chain master link.

Conclusions

Removing a bike chain without a master link can be a bit of a hassle, but with the right steps, it’ll be a cinch in no time. Our 3-step guide will make the process as simple as possible for you. Follow these steps and you’ll remove your bike chain without a master link!

FAQ’s

---